Contact Us

Irrigation Design & Installation in Austin, TX

Custom irrigation design and installation that waters your Austin yard the smart way. We plan and install zones, drip lines, sprinkler heads, and rain sensors so every plant gets what it needs while you save water and stay within Central Texas watering rules.

Schedule An Estimate
Irrigation design plan with drip zones for an Austin landscape
Watering Plans

Austin Irrigation Design Done Right

Irrigation design is the plan that decides how water reaches every part of your yard. It maps out zones, lines, heads, and controls before anything goes in the ground. It is for Austin homeowners who want healthy plants without wasting water or fighting watering limits all summer. We design the system and install it too, so the plan you approve is the system that goes in the ground. Irrigation design is also part of our full landscape design work.

Testimonials

Our Customer Reviews

Rated 4.8 out of 5 from 28 Google reviews

Why 512 Luxury Landscape Design

Why Austin Homeowners Choose Us for Irrigation Design

Watering in Austin means balancing what your plants need with what the city allows.

  • Rated 4.8 on Google

    28 homeowners have reviewed us on Google, with an average of 4.8 out of 5 stars. Read our Google reviews

  • Designing and Building Since 2018

    One in-house team designs and builds your project, so there is no handoff between a designer and a separate crew. The owner stays involved from the first walk-through to the final cleanup.

  • Zones Planned Around Clay and Watering Rules

    Clay soil takes water in slowly, so we use drip lines in beds and schedule runs to cut runoff. Sunny and shaded areas get separate zones with different run times. Every schedule follows local watering rules, and smart controllers with rain sensors skip cycles after storms.

Irrigation Design & Installation in Austin, TX

SMART WATERING PLANS FOR CENTRAL TEXAS YARDS

Watering a yard in Austin is not as simple as turning on a sprinkler. Different plants need different amounts, sun and shade change across the property, and the city limits how often you can run a system. A good irrigation design solves all of that on paper first. We split your yard into zones, match each one to the right method, and build in sensors and controls so your landscape stays healthy while your water bill stays in check.

How Our Irrigation Design Process Works

Every watering plan starts with the plants and the property, then works toward an efficient system.

  • A site review of plant types, sun, shade, slope, and soil.
  • A zone map that groups areas by how much water they need.
  • A line, head, and drip layout matched to each zone.
  • A controller, sensor, and scheduling plan ready to install.

Why Irrigation Design Matters in Austin

Central Texas heat and dry spells put real stress on plants, and clay soil makes watering tricky because it runs off fast and then holds moisture for a while. Watering by guess usually means some plants drown while others go thirsty, plus a lot of wasted water. A real design accounts for soil, slope, and plant needs so water soaks in where it should. It also keeps you within Austin watering rules without the guesswork.

What an Irrigation Plan Can Include

We tailor every system to your yard, but most plans pull from these parts.

  • Drip lines for beds, gardens, and trees
  • Efficient sprinkler zones for lawn areas
  • Separate zones grouped by water need
  • Rain and soil-moisture sensors
  • Smart controllers and scheduling
  • Backflow and pressure planning

Designing Around Austin Watering Rules

Austin sets watering schedules that limit which days and hours you can run a system, and those rules tighten during drought. We design with those limits built in from the start. By grouping plants into zones by water need and leaning on drip where it fits, your system can deliver enough water in the allowed window without stressing your plants or breaking the rules. Smart controllers and rain sensors handle the rest, skipping cycles after a storm and adjusting through the seasons. The goal is a yard that stays healthy and a watering setup you never have to babysit.

Drip and Sprinkler Installation

Once the plan is set, our crew installs the system. We build every system to last and run clean:

  • We check your water pressure, beds, and plant layout to size the system correctly.
  • We lay drip lines and emitters that deliver water right to each plant's roots.
  • We set up spray zones for open lawn areas.
  • We install a controller, and a smart one if you want weather-based watering.
  • We test every zone, check the coverage, and walk you through how it runs.

Spray sprinklers still have a place, mostly for lawns. But for garden beds, shrubs, and trees, drip is almost always the better call. Spray throws water into the air, where the Austin sun and wind take much of it before it reaches a root. Drip releases water slowly at the base of each plant. That means fewer weeds, less fungus in your beds, and slow, deep watering that suits our clay soil. For many yards, we install a mix: spray for the open lawn and drip for the planted areas.

Irrigation Across the Austin Area

We offer irrigation design and installation for homes across Central Texas, including Leander, Dripping Springs, Lakeway, Austin, and Cedar Park. See every community we work in on our service areas page.

Planning ahead? Read our guide to xeriscaping in Austin.

Ready for a watering plan that saves water and keeps plants happy? Contact us today to schedule your free consultation.

Get Started with Irrigation Design
Built for Central Texas

Why Irrigation Design in Central Texas Requires a Custom Approach

Watering a yard in Central Texas is not something you can set once and forget. Clay soil absorbs water slowly, which means too much irrigation at once runs off before it soaks in. Austin watering schedules limit which days and hours you can run a system, and those limits tighten during drought. A good irrigation plan accounts for all of it so your plants stay healthy without wasting water or breaking the rules.

We also design around how sun, shade, and plant types vary across a property. A shaded bed in Westlake needs far less water than an exposed lawn in Leander. Getting that right on paper before the system goes in the ground saves water and keeps plants from being overwatered or stressed.

  • Expansive clay soil that runs water off the surface before it soaks in, requiring careful scheduling and drip irrigation in beds.
  • Austin and area watering rules that restrict irrigation days and times, built into every zone schedule we design.
  • Varied sun and shade across most properties in Austin, Lakeway, Dripping Springs, and Cedar Park that require separate zones with different run times.
  • Smart controllers and rain sensors that skip watering cycles after storms so you stay within rules and conserve water automatically.
  • Service across Austin, Westlake, Lakeway, Bee Cave, Dripping Springs, Round Rock, Cedar Park, Georgetown, and Leander.
Irrigation Design & Installation in Austin, TX by 512 Luxury Landscape Design in Austin, TX
Questions & Answers

Irrigation Design & Installation FAQs

  • What is the difference between irrigation design and installation?

    Irrigation design is the plan: where the zones, lines, heads, and controllers go and how much water each area gets. Installation is putting the system in the ground. We do both, so the design and the build come from the same team.

  • Why does an Austin yard need a custom irrigation plan?

    Austin watering limits, clay soil, and mixed sun and shade mean one watering setting does not fit a whole yard. A design splits the property into zones so beds, lawn, and trees each get the right amount, which keeps plants healthy and keeps you within the rules.

  • Does an irrigation design help save water?

    Yes. A good plan uses drip lines where they fit, groups plants by water need, and adds rain sensors and smart controllers so the system skips watering after a storm. That cuts waste and lowers your summer water bill.

  • Can you add drip to my existing sprinkler system?

    In most cases, yes. We can tie a new drip zone into an existing system or build a fresh setup from scratch. We size everything to match your beds, plants, and water pressure.

  • Should I use drip or spray sprinklers?

    Spray sprinklers work best for open lawn areas. For garden beds, shrubs, and trees, drip is almost always the better choice because it puts water right at the roots with little lost to heat or wind. Many Austin yards use a mix of both.

Suppliers We Build With

Built with Trusted Materials